Inhibition of stray grains at melt-back region for re-using seed to prepare Ni-based single crystal superalloys

Publication date: Available online 3 October 2019Source: Progress in Natural Science: Materials InternationalAuthor(s): Songsong Hu, Lin Liu, Wenchao Yang, Dejian Sun, Miao Huo, Yafeng Li, Taiwen Huang, Jun Zhang, Haijun Su, Hengzhi FuAbstractAssisted by the mold preinstalled an alumina tube into seed segment, the influence of the original primary dendrite spacing of seed on the formation of stray grains at melt-back region was investigated during Ni-based single crystal casting using seeding method. The results showed that the interface reaction between the seed and mold as well as the formation of stray grains at the surface of seed were avoid using an alumina tube with surface roughness of 0.35 μm as the mold inner wall. As the original primary dendrite spacing of the seed decreased to less than 201 μm, the morphology of un-melted solid phase in semi-solid zone changed from isolated dendrite stem to the complex network, resulting in the inhibition of the formation of stray grains inside of the seed. The seed with original primary dendrite spacing of 201 μm was also successfully re-used to fabricate single crystal casting.Graphical abstract
Source: Progress in Natural Science: Materials International - Category: Materials Science Source Type: research