Laser Patterning of CIGS thin Films with 1550 nm Nanosecond Laser Pulses

Publication date: 2016 Source:Physics Procedia, Volume 83 Author(s): Martin Ehrhardt, Pierre Lorenz, Lukas Bayer, Igor Zagoranskiy, Klaus Zimmer The results of laser scribing experiments of CIGS thin films deposited on Mo-coated stainless steel sheets, using laser pulses with a wavelength of 1550 nm and a pulse duration of 6 ns, are presented in this study. It is shown that a removal of the CIGS from the Mo film is possible without edge melting of the CIGS or damaging of the Mo. The critical parameter for inducing the delamination lift-off process of the CIGS from the Mo was identified to be the scribing speed of the laser. In dependence on the laser parameters two different material removal processes were found. For a low pulse overlap the laser pulse penetrates the CIGS film and is absorbed in the interface between the CIGS and the Mo causing a lift-off process of the CIGS from the Mo back contact. For a high pulse overlap an ablation process starting from the top side of the CIGS film was found. The composition and morphology of the sample material after the laser patterning were analysed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and micro-Raman spectroscopy.
Source: Physics Procedia - Category: Physics Source Type: research